Maintenance 4-3
Replacing the Toner Container
This section explains how to replace the toner container.
1 Open the top cover.
2 Turn the lock lever to the unlock position. Push the lock lever to the
position marked by the arrow and pull out the toner container.
CAUTION Do not attempt to incinerate parts which contain
toner. Dangerous sparks may cause burns.
IMPORTANT During toner container replacement, temporarily move
storage media and computer supplies (such as floppy disks) away
from the toner container. This is to avoid damaging media by the
magnetism of toner.
IMPORTANT We are not liable against any damages or problems
arising from the use of toner containers other than those designated
as original our toner containers. For optimum performance, it is also
recommended to use only the our toner containers which are
specifically intended for use in your country or region. If the toner
container for another destinations is installed, the printer will stop
printing.
Note You do not have to turn printer power off before starting
the replacement. Any data that may be processing in the printer
will be deleted if you turn the printer power off
.
Note Put the old toner container in the plastic bag (supplied
with the new toner kit) and discard it later according to the local
code or regulations for waste disposal.
To Next Page
Loading...
Need help?
General
