6-6
Using Various Functions > Functions Available on the Machine
Removable Memory (Store File, Printing Documents)
To configure the settings for functions, press the function key. By pressing [Functions], other selectable functions will be
shown as a list.
For details on each function, see the table below.
Store File
Function key Description
Reference
page
File Format Specify the image file format. Image quality level can also be adjusted. page 6-24
Duplex Select the type and orientation of the binding based on the original. page 6-22
Scan Resolution Select fineness of scanning resolution. page 6-27
Density Adjust density using 9 levels. page 6-11
File Name Entry Adds a file name. page 6-21
Quiet Mode Lower print and scan speed for quiet processing. page 6-21
Functions Description
Reference
page
Original Size Specify the original size to be scanned. page 6-8
Original Orientation Select the orientation of the original document top edge to scan correct direction. page 6-10
Storing Size Select size of image to be stored. page 6-29
Color Selection Select the color mode setting. page 6-12
Original Image Select original image type for best results. page 6-11
Sharpness Adjusts the sharpness of image outlines. page 6-13
Background Density
Adj.
Removes dark background from originals, such as newspapers. page 6-13
Prevent Bleed-thru Hides background colors and image bleed-through when scanning thin original. page 6-14
Zoom Adjusts the zoom to reduce or enlarge the image. page 6-14
Continuous Scan Scans a large number of originals in separate batches and then produce as one job. page 6-19
Job Finish Notice Sends E-mail notice when a job is complete. page 6-20
File Separation Creates several files by dividing scanned original data page by page before sending
the files.
page 6-27
To Next Page
Loading...
Need help?
General
Weight and Dimensions
