When contacting us, the serial number will be necessary. To check the serial number, refer to Display for Device
Information on page 3-8.
Message Checkpoints Corrective Actions
Reference
Page
Activation error. ― Turn the power switch off and on. If
the error exists, contact
administrator.
―
Add the following paper
in cassette #.
Does the selected paper size
matches the paper size loaded in
the specified paper source?
Press [Continue] to continue
printing.
Press [Cancel] to cancel the job.
—
Is the indicated cassette out of
paper?
Load paper.
Press [Paper Selection] to select
the other paper source. Press
[Continue] to print on the paper in
the currently selected paper source.
page 3-12
Add the following paper
in the multi purpose tray.
Does the selected paper size
matches the paper size loaded in
the specified paper source?
Press [Continue] to continue
printing.
Press [Cancel] to cancel the job.
—
Is the indicated cassette out of
paper?
Load paper.
Press [Paper Selection] to select
the other paper source. Press
[Continue] to print on the paper in
the currently selected paper source.
page 3-18
Message Checkpoints Corrective Actions
Reference
Page
Box is not found. ― The specified box cannot be found.
Job is canceled. Press [End].
—
Box limit exceeded.
*1
*1 When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time elapses. For details
on Auto Error Clear, refer to Auto Error Clear
on page 8-39.
Is [End] displayed on the screen? The specified box is full, and no
further storage is available; Job is
canceled. Press [End]. Try to
perform the job again after printing
or deleting data from the box.
—
To Next Page
Loading...
Need help?
General
Weight and Dimensions
