Utax P-5031DN User Manual

Operation Panel
4-48
3 Press  or  to select output stack - TopTray FaceDown or Rear
Tray FaceUp.
4 Press [OK]. The output stack is set and the Print Settings menu
reappears.
Override A4/LTR (Overriding difference between A4 and Letter)
When the Override A4/LTR is turned On using the operation panel, the printer ignores the difference between A4 and
Letter paper sizes. Printing is performed without an error message even if the actual paper size in the current cassette differs
from the paper size formatting the job.
1 In the Print Settings menu, press  or  to select Override
A4/LTR.
2 Press [OK]. The Override A4/LTR screen appears.
3 Press  or  to select Off or On.
4 Press [OK]. The Print Settings menu reappears.
Emulation (Setting the emulation)
You can change the emulation mode. Use the procedure below to select the mode.
1 In the Print Settings menu, press  or  to select Emulation
Set..
2 Press [OK]. The Emulation Set. menu screen appears.
3 Press  or  to select Emulation.
4 Press [OK]. The Emulation screen appears showing a list of the
available emulations. The defaults differ depending on the delivery
destination.
The available emulations are as follows:
PCL6
IBM Proprinter
EPSON LQ-850
Line Printer
KPDL
KPDL(Auto)
5 Press  or  to select the desired emulation.
6 Press [OK]. The emulation is set and the Emulation Set. menu
reappears.
Override A4/LTR:
Off
01
On
02
*
Note To print the PDF file using FTP printing, set emulation to KPDL.
Emulation Set.:
Exit
01
Emulation
Emulation:
PCL6
01
IBM Proprinter
02
*
EPSON LQ-850
03

Utax P-5031DN Specifications

General

Brand	Utax
Model	P-5031DN
Category	Printer
Language	English