Operation Panel
4-122
8 Enter the Login Password using the numeric keys then press [OK].
The log in screen reappears.
9 Pressing [Login] ([Right Select]). If the entered Login User Name
and Login Password are correct, the Security menu screen
appears.
Network Security (Network security setting)
Use this procedure to specify the security settings for each of the network protocols used.
The options available in Network Security are as follows:
• SSL Setting (SSL Server setting)...4-123
1 In the Security menu, press or to select Network
Security.
2 Press [OK]. The Network Security menu screen appears.
Login User Name:
Login
Login Password:
6000
Note The initial setting for the administrator's Login
Password is set as shown below.
P-4531DN: 4500
P-5031DN: 5000
P-5531DN: 5500
P-6031DN: 6000
For details on entering characters, refer to Character Entry
Method on page A-2.
Security:
Security Level
Exit
03
I/F Block Set.
02
01
Network Security
IMPORTANT Check with your network administrator when selecting network settings.
Network Security:
Exit
01
SSL Setting
To Next Page
Loading...
Need help?
General
