4-151
Operation Panel
Each Job (Permission for settings for each jobs)
It is possible to set the use of Quiet Mode for each job. Set whether or not to permit the setting for each job.
1 In the Quiet Mode menu screen, press or to select Each Job.
2 Press [OK]. The Each Job menu appears.
3 Press or to select Permit or Prohibit.
4 Press [OK]. The selected mode is set and the Quiet Mode menu
screen reappears.
Restart (Restart Printer)
The procedure described below resets the printer’s temporary conditions, such as the current page orientation, font, etc.,
set by commands to their default values. Downloaded fonts and macros are deleted from the printer’s memory.
1 In the Adjust/Maint. menu screen, press or to select
Restart..
2 Press [OK]. A confirmation screen appears.
Press [Yes] ([Left Select]). The printer is restarted.
Pressing [No] ([Right Select]) returns to the Adjust/Maint.
menu screen without restarting the printer.
Each Job:
Permit
01
Prohibit
02
*
Restart.
Are you sure?
Yes
No
To Next Page
Loading...
Need help?
General
