2-11
Preparation before Use
14Insert the Product Library disk.
15Click View License Agreement and read the License Agreement.
Click Accept.
16Select Maintenance.
17Select Wi-Fi Setup Tool.
18Click Run.
19Select Do not use automatic configuration.
20Click Next twice.
21Click Wi-Fi Direct.
22Click Next twice.
23Click Advanced setup.
24Click Next.
Select Express or Custom as device discovery method and specify
the IP address or host name to search the machine.
25Select the machine.
26Click Next.
27Select Use the device settings. on Authentication mode
28Enter the login user name and password (Login user name and
Password are both Admin.), and then click Next.
29Configure the communication settings and then click Next.
30Change the settings of access point as necessary and then click
Next.
The network is configured.
Note Installation on Windows must be done by a user logged
on with administrator privileges.
If the Welcome to the Found New Hardware Wizard dialog
box displays, select Cancel.
If the autorun screen is displayed, click Run setup.exe.
If the user account management window appears, click Yes
(Allow).
To Next Page
Loading...
Need help?
General
