Preparation before Use
2-18
2 Click View License Agreement and read the License Agreement.
Click Accept.
3 Select Express Install tab.
4 Select the device to be installed.
You can also select Use host name for port name and set to use the
host name of the standard TCP/IP port. (A USB connection cannot be
used.)
IMPORTANT If Wi-Fi or Wi-Fi Direct is enabled, be sure to
specify the IP address for the port name.
Installation may fail if the host name is specified.
5 Select the features you want to use with this device.
6 Click Install.
Note The machine cannot be detected unless it is on. If the
computer fails to detect the machine, verify that it is
connected to the computer via a network or USB cable and
that it is turned on and click (Reload).
Note If the Windows security window appears, click Install
this driver software anyway.
To install Status Monitor, it is necessary to install Microsoft
.NET Framework 4.0 beforehand.
To Next Page
Loading...
Need help?
General
