Val Controls I 24-B Series User Manual

DHP-UM-020
Val Controls A/S • Limfjordsvej 3 • DK-6715 Esbjerg N • Tel. +45 7547 0600 • Fax +45 7547 0611
vc@valcontrols.com • www.valcontrols.com
Revision: 12
12/38
5.3 Status
If the user wants to get a live status on the control parameters or a general overview of the chosen
configuration parameters, this is accessible by pressing the “↓” button while the positioner is in
regulation mode. The regulation of the valve will not be influenced.
Status
Description
1 Live status Show updated values
SP - Flow % value of the control loop - Flow
PV - Flow % value of the position loop/sensor - Flow
TM - Flow % value of the transmitter loop - Flow
SP - Travel % value of the control loop - Travel
PV - Travel % value of the position loop/sensor - Travel
SP - mA mA value of the control loop from control room
PV - mA mA value of the position loop
TM - mA mA value of the transmitter loop to control room
Cnt DO1 Puls counter for DO1
Cnt DO2 Puls counter for DO2
Cnt DO3 Puls counter for DO3
Cnt DO4 Puls counter for DO4
DO1 Current status of DO1
DO2 Current status of DO2
DO3 Current status of DO3
DO4 Current status of DO4
DO5 Current status of DO5
DO6 Current status of DO6
DI1 Current status of DI1
DI2 Current status of DI2
DI3 Current status of DI3
DI4 Current status of DI4
DI5 Current status of DI5
DI6 Current status of DI6
DI7 Current status of DI7
DI8 Current status of DI8
AI1 - mA mA value of the input
AI2 - mA mA value of the input
AI3 - mA mA value of the input
AI4 - mA mA value of the input
AO1 - mA mA value of the output
AO2 - mA mA value of the output
Control Mode The control mode (ESD/Off/Local/Remote)
2 Identification Values to identify the product
SW-ID Software ID
SW ver. Software version
Serial no. Serial number
Model no. Model number
Regulator Regulator type
Tag no. Tag number

Val Controls I 24-B Series Specifications

General

Brand	Val Controls
Model	I 24-B Series
Category	Valve Positioners
Language	English