Name: Vertiv NetSure 5100 Series
Brand: Vertiv
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Vertiv™ NetSure™ 5100 Series -48 VDC Power System User Manual

4.5 Adding an Inverter Module to an Existing Inverter Module Mounting

Assembly

To increase system current capacity, an inverter module can easily be added to an existing inverter module mounting assembly that

contains an empty inverter module mounting position.

Inverter modules can be inserted or removed with power applied (hot swappable).

NOTE!

Each inverter module locks into the module mounting shelf by means of a latch located on the bottom of the inverter

module. The latch and inverter module handle are interactive. Pushing the handle up into the inverter module’s front panel

causes the latch to extend to the locking position; pulling the handle down out from the inverter module’s front panel causes

the latch to retract. See

Figure 4.12

WARNING! To prevent damage to the latching mechanism, ensure the handle is in the open position when installing or

removing an inverter module. NEVER hold the handle in the closed position when installing an inverter module into a shelf.

Procedure

1. Unpack the inverter modules.

2. If present, remove blank cover panels from the module mounting positions into which inverter modules are to be installed.

3. Place the inverter module into an unoccupied mounting position without sliding it in completely.

4. Loosen the captive screw on the inverter module’s handle. Pull the handle down out from the inverter module’s front panel

(this will also retract the latch mechanism). See Figure 4.12.

5. Push the inverter module completely into the shelf.

6. Push the handle up into the inverter module’s front panel. This will lock the inverter module securely to the shelf. Tighten

the captive screw on the handle.

7. Repeat the above steps for each inverter module being installed in the system.

8. After the inverter modules are physically installed in the mounting shelf(s), they are ready for operation immediately after

power is supplied to them.

Vertiv NetSure 5100 Series User Manual

Other manuals for Vertiv NetSure 5100 Series