- Remove the rear wheel.
- Unscrew the oil drainage plug and drain out all
the oil.
- Screw in the drainage cap again and fill the hub with the prescribed oil.
Recommended products
AGIP ROTRA 80W-90 rear hub oil
SAE 80W/90 Oil that exceeds the requirements of API GL3 specifications
Characteristic
Rear hub oil
Capacity ~ 100cc
Locking torques (N*m)
Hub oil drainage screw 15 to 17 Nm
Air filter
Proceed as follows:
- Undo the indicated fixing screws.
- Remove the left side fairing.
- Remove the helmet compartment.
- Undo the six screws and remove the air-box cov-
er.
- Remove the filtering element and clean it with
water and shampoo; then dry it with a clean cloth
and short blasts of compressed air. Finally, im-
merse it in a mixture of 50% oil of the recommen-
ded type and 50% petrol. Then gently squeeze the
Vespa LX 125 - 150 i.e. Maintenance
MAIN - 37
To Next Page
Loading...
Need help?
General