EasyManuals Logo
Home>Vespa>Scooter>LX Series

Vespa LX Series User Manual

Vespa LX Series
272 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #40 background imageLoading...
Page #40 background image
Engine oil filter
The cartridge filter must be replaced every time the oil is changed. Use new oil of the recommended
type for topping up and changing purposes.
Make sure the pre-filter and drainage plug O-rings are in good conditions. Lubricate them and refit the
mesh filter and the oil drainage plug, screwing them up to the prescribed torque. Refit the new cartridge
filter being careful to lubricate the O-ring before fitting it. Change the engine oil.
Recommended products
AGIP CITY HI TEC 4T Engine oil
SAE 5W-40 Synthetic oil that exceed the requirements of API SL, ACEA A3, JASO MA specifications
Oil pressure warning light
The vehicle is equipped with a warning light on the
instrument panel that lights up when the key is
turned to the «ON» position. However, this light
should switch off once the engine has been star-
ted.
If the light turns on during braking, at idling
speed or while turning a corner, it is necessary
to check the oil level and the lubrication sys-
tem.
Maintenance Vespa LX 125 - 150 i.e.
MAIN - 40

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Vespa LX Series and is the answer not in the manual?

Vespa LX Series Specifications

General IconGeneral
BrandVespa
ModelLX Series
CategoryScooter
LanguageEnglish

Related product manuals