Exhaust assy. Removal
- Remove the 2 fixing nuts from the manifold to the
head
- Remove the Lambda probe from its support and
disconnect it.
- Release the lambda probe cable from the brack-
ets on the fan cover.
- Loosen the 2 exhaust fixing screws to the crank-
case, then remove the whole exhaust.
Remove the lambda probe from the manifold.
CAUTION: SHOULD IT BE NECESSARY TO REMOVE ONLY THE MUFFLER TIP, ALWAYS RE-
PLACE THE GRAPHITE GASKET BETWEEN STUB AND TIP.
Vespa LX 125 - 150 i.e. Engine from vehicle
ENG VE - 87
To Next Page
Loading...
Need help?
General