❑ Tighten hose clip with hose clip pliers -V.A.G 1275-
12 - Boot for triple roller joint
❑ Check for splits and chafing
13 - Hose clip
❑ Always renew after removing
❑ Tighten hose clip with hose clip pliers -V.A.G 1275-
14 - Drive shaft
15 - Bolt
❑ 20 Nm
❑ For Golf only
16 - Bearing bracket
❑ For Golf only
17 - Bearing
❑ For Golf only
18 - Joint body with intermediate shaft
❑ For Golf only
❑ For right side of vehicle
19 - Countersunk head bolt
❑ Initially tighten to 5 Nm and then to 35 Nm
❑ For Golf only
20 - Joint body
❑ For left side of vehicle
21 - Multi-point socket head bolt
❑ Initially tighten diagonally to 10 Nm and then tighten diagonally to specified torque.
M8 bolt: 40 Nm
M10 bolt: 70 Nm
❑ Always renew bolts after removing
Golf 2004 ➤ , Golf Plus 2005 ➤
Running gear, axles, steering - Edition 08.2009
128 Rep. Gr.40 - Front suspension