1b-Heat
distribution lever for front
and rear
footwells
(DEF-HEAT)
With the lever on the tunnel next to the
driver's seal you can control the dis-
tribution of heat to the front and rear
footwells.
Lever down - front and rear footwells
closed
Lever up - front and rear footwells
fully open
You can select any intermediate position
to regulate the distribution of heat to the
front and rear footwells.
2 - Defroster vents for front side
windows
(Convertible only)
Volume and direction of the air coming
from the outlets on the dashboard can
be controlled separately by adjusting
the flaps in the outlets. They can be
opened or closed by pressing against
one side of the flaps. When the flaps are
closed,
the entire volume of warm air
flows through the vents at the windshield
(-
1
-)•
Beetle
Hints for defogging and defrosting
Defogging and defrosting your
wind-
shield will be more effective if you
direcl
the total air flow toward the windshield.
Here is what to do:
1.
Heater temperature
lever-1a-all
the
way up [TEMP) - heat is on.
2.
Heat distribution lever -1b- all the
way down (DEF) - no heat to the front
and rear footwells.
3.
Set
the levers
in
the
vents-2a-below
the windshield straight up.
(Convertible:
open
the flaps
in
the front
side window vents - 2 -).
For defogging purposes
il
may be ad-
visable to add fresh air to the warm air
flow
4.
Turn both fresh air knobs - 10 - (Con-
vertible: the left fresh air knob - 19 -)
Convertible to the left (see next page) and turn on
1
the fresh airfan-18-(see
page 28),
Now all air is directed toward the
wind-
shield (Convertible: and to the front side
windows).