4.3 Automatic headlight control and static
cornering light: checking function
Note
The automatic headlight control was formerly called driving light
assist.
• Vehicle must be in natural daylight.
– Switch on ignition.
– Change light switch -1- to position “Auto” -2-.
The headlights may not light in brightness.
The rain and light sensor is located centrally at top of wind‐
screen -arrow-.
– Switch on ignition.
– Change light switch -1- to position “Auto” -2-.
– Cover light/rain sensor -arrow- from outside with your hand
or a suitable object.
This measures the light incidence and the headlights are
switched on.
Static cornering light
The static cornering light is integrated in the headlights.
– Start motor.
– Switch on dipped headlight.
– Switch on turn signal.
– Check cornering light.
ID.4 2021 ➤
Maintenance - Edition 12.2020
4. Descriptions of work 21
To Next Page
Loading...
Need help?
General
