– Repeat procedure on other side.
4.4 Battery (12V): checking battery termi‐
nal clamps for secure seating
Special tools and workshop equipment required
♦ Torque wrench
Note
♦
A securely seated battery terminal clamp ensures trouble
free function and long service life of the battery.
♦
When securing terminal clamp, ensure that it is completely
seated on battery terminal.
NOTICE
The battery clamp on the positive terminal is not firmly attach‐
ed.
Potential short circuit or sparks.
– First, always disconnect the battery earth strap from the
battery negative terminal.
– Release locking lug -3-.
– Remove cover for high-voltage connection on vehicle front
end -2-.
– Remove cover for high-voltage connection on vehicle front
end -1- from guide.
– Check battery -1- for secure seating. If necessary, retighten
bolt -3- on securing bracket -2- to specified torque.
ID.4 2021 ➤, ID.5 2021 ➤
Maintenance - Edition 11.2021
4. Descriptions of work 23
To Next Page
Loading...
