Note
To prevent brake fluid from flowing out of the reservoir, the max.
marking -1- must not be exceeded.
Brake fluid level during inspection
Note
♦
The fluid level must always be judged in conjunction with
lining/pad wear.
♦
When vehicle is in use, fluid level tends to drop slightly due
to lining/pad wear and automatic adjustment.
Recommended brake fluid level “before” brake pads are at wear
limit
• At MIN marking or just above -2-
“replenishing is NOT required”.
Recommended brake fluid level, brake pads new or well within
wear limit:
• Between MIN and MAX markings
NOTICE
If the fluid level is below min. marking -2-, the brake system
must be checked for leaks before fluid is topped up, “Repair
measure”.
4.12 Front brake discs and rear drum brake
pads: checking thickness of pads and
condition of discs
Front disc brake pads: checking thickness ⇒ page 37
Rear drum brake pads: Checking thickness ⇒ page 38
Brake discs: checking condition ⇒ page 39
Special tools and workshop equipment required
♦ Torque wrench
ID.4 2021 ➤
Maintenance - Edition 12.2020
36 4. Descriptions of work
To Next Page
Loading...
Need help?
General
