9.1 Removing
Note
♦
Make parting cuts with pneumatic jig-saw -V.A.G 1523- only.
♦
When making parting cut -3-, keep cutting/overlap of replacement part in mind.
– Make parting cut -1- on A-pillar according to damage.
– Make parting cut -2- over the mounting of the lower door hinge
of the rear door.
– Make parting cut -3-.
– Grind through outer edge on wheel arch.
– Release original joint.
Jetta 2005 ➤
Body Repairs - Edition 04.2009
9. Renewing side member 147