Pistons, Change
1 Note the
positions of the pistons in relation to the
crankshaft.
Remove the retainer rings (1) and press the pis-
ton pin out (2).
2 Clean the piston pin bushing and check it.
3 Install a new piston in the correct position.
Press the piston pin in.
Install the retainer rings with the lugs facing
upwards.
Big end bearing, change
Pistons, removed
1 Remove the big end bearings (1) and put the new
ones in position.
21-3 Cylinder Liner, Pistons
47701798 05-2013 © AB VOLVO PENTA 67
To Next Page
Loading...
Need help?
General
