88
CALL INTERCEPT
While screening a call, you can stop recording and speak to
the caller by pressing
TALK/RECALL on the handset.
REMOTE ACCEss
A two-digit security code is required to access the
answering system remotely from any touch-tone
telephone. The preset code is 19. See Remote access
code section to change it.
Dial your telephone number from any touch-tone
telephone.
When the answering system answers, press * and
then enter the two-digit remote access code.
Then you can enter one of the following remote
commands.
Command Description
1 Press to listen to all messages.
2 Press to listen to new messages only.
3
Press to delete the current message
(during playback).
33 Press twice to delete all old messages.
4
Press to repeat the current message
(during playback).
5
Press to stop any operation (including
recording).
1.
2.
3.
To Next Page
Loading...
Need help?
General
