VTech CD1153 User Manual

7
Getting started
Installation options
If you want to mount your telephone on a wall, use the mounting bracket to connect
with a standard dual-stud telephone wall mounting plate. If you do not have this
mounting plate, you can purchase one from many hardware or consumer electronic
retailers. Professional assistance may be required to install the mounting plate.
Tabletop to wall mount installation
To install the telephone base in the wall mount position, make sure you first unplug the
telephone line cord from the telephone wall jack.
1. Put the handset aside. Hold down the switch hook on the telephone base, then
slide the handset tab upwards to remove it from the slot. Rotate the handset tab 180
degrees. Push the handset tab down into the slots until it locks into position.
Switch hook
Handset tab
2. Grasp and squeeze as the arrows indicated to open the hinged bracket. Rotate the
bracket and lock it into wall mount position as indicated below.
Tabletop mount
positon
Wall mount
positon
PULL TAB
TO OPEN
CAUTION: DISCONNECT TELEPHONE LINE BEFORE CHANGING BATTERIES.
PULL TAB TO OPEN
PULL TAB TO OPEN
CAUTION:
DISCONNECT TELEPHONE LINE BEFORE CHANGING BATTERIES.
PULL TAB TO OPEN

VTech CD1153 Specifications

General

Brand	VTech
Model	CD1153
Category	Telephone
Language	English