VTech CD1153 User Manual

13
Telephone settings
Telephone settings
Set date and time
When the telephone is idle, the screen shows the date and time. If you subscribe
to caller ID service, the day, month and the time are set
automatically with each incoming call. You may also set the
date and time manually (see Review the caller ID history on
page 30).
1. Press MENU, the screen displays DATE/TIME and USE #
FOR AM/PM alternatively.
2. Use the dial pad keys (0-9) to set the month, or press
to skip to set the day.
3. Use the dial pad keys (0-9) to set the day, or press
to skip to set the hour.
4. Use the dial pad keys (0-9) to set the hour, or press
to skip to set the minute.
5. Use the dial pad keys (0-9) to set the minute.
6. Press # (pound key) to select between AM or PM.
7. Press SELECT to save your setting and move to the next
menu setup.
Contrast
You can set the contrast of the screen to one of four levels.
1. Press MENU repeatedly until the screen displays CONTRAST.
2. Use or to choose from 1, 2 (default), 3 or 4.
3. Press SELECT to save your setting and move to the next menu
setup.
Language
You can select the language used for all screen displays.
1. Press MENU repeatedly until the screen displays
LANGUAGE.
2. Use or to choose ENGLISH (default), FRANCAIS or
ESPANOL, then press SELECT. The screen displays SET
LANGUAGE?
3. Press SELECT to confirm your setting and move to the next
feature setup.
If you accidentally change the language to French or Spanish, you
can reset it back to English without going through the French of
Spanish menus. When in idle mode, press MENU/SELECT once,
then enter *36454 74#.
DATE/TIME
12:00
AM
1/01
USE # FOR AM/PM
12:00
AM
11/20
CONTRAST
2
LANGUAGE
ENGLISH
Blinking

VTech CD1153 Specifications

General

Brand	VTech
Model	CD1153
Category	Telephone
Language	English