14
Telephone settings
Menu setup
LOCL AREA CODE
LAC 1-_ _ _
Home area code
If you dial seven digits to make a local call (no area code required), enter your area
code into the telephone as the home area code. When you receive a call from within
your home area code, the caller ID history only displays the seven digits of the number,
and when you dial from the call log, only seven digits are dialed.
If you use 10-digit (area code + telephone number) or 11-digit (1 + area code
+telephone number) formatting to dial within your area code, leave this setting blank.
HOME AREA CODE
HAC-_ _ _
Local area code
If you dial 10 digits to make calls to areas outside your home area code (without
dialing 1), then set local area codes into the telephone. After setting, if you receive
a call from one of these local area codes, the screen displays the 10 digits of the
telephone number.
1. Press MENU repeatedly until the screen displays HOME
AREA CODE.
2. Use the dial pad keys (0-9) to enter three-digit area code.
To delete an entered digit, press or to move to the
desired location, then press DELETE.
3. Press SELECT to save the setting. The local area code setup
screen displays.
1. Press MENU repeatedly until the screen displays LOCAL
AREA CODE.
2. Use the dial pad keys (0-9) to enter the first local area code
in LAC 1. To delete an entered digit, press or to move
to the desired location, then press DELETE.
3. Press MENU to save the first local area code setting and advance to the next local area
code setting (LAC 2, LAC 3 or LAC 4), then follow step 2 above to set other local area
codes if necessary.
4. Press SELECT to save your setting and move to the next menu setup.
To Next Page
Loading...
Need help?
General
