BT Verve 450 – Edition 4 – 14.05.07.07 – 8179
If you experience any problems, please call the Helpline on 0870 240 3962 or email bt.helpdesk@vtecheurope.com
to play the next message.
to pause and resume playback.
to stop playback.
adjust the speaker volume + or – during playback.
At the end of playback press and follow the voice
prompt to press again to delete all old messages.
Remote access
You can operate your answering machine from any
Touchtone™ phone by calling your VT9011 and
entering a 4 digit security code.
To enable/
disable remote access
1. Press
Menu
. Scroll to
Answer machine
and press
OK
.
2. Scroll or to
Remote access
and press
OK
.
3. Press or to select
Disable
or
Enable
.
4. If you select
Enable
the display asks you to enter the Remote
access PIN. Enter the current 4-digit PIN. The default setting
is 0000. Press
OK
.
5. Enter a new PIN. Press
OK
. Enter the PIN again and press
OK
to save.
Answering machine
Remote access
When enabled, you can call in from
another phone to lis
ten to your
messages and operate your answering
machine. You are asked to set a Remote
Access PIN so that other people cannot
ring up and listen to your messages.
When Disable is selected on the
R
emote access settings, the PIN is
automatically re-set to 0000.
8179 Verve 450 UG [4] 14/5/07 16:06 Page 50
42
To Next Page
Loading...
Need help?
General
