65
BT Verve 450 – Edition 4 – 14.05.07.07 – 8179
If you experience any problems, please call the Helpline on 0870 240 3962 or email bt.helpdesk@vtecheurope.com
Help
Phone does not work
• Have you in
stalled the batteries correctly? See page 2.
• Check that the mains power is correctly connected.
No dial tone
• Is the telephone cord of the base plugged into the phone socket?
•
Check that the mains power is correctly connected.
• Only use the telephone cord supplied with the phone.
Cannot dial out or receive calls
• Check that the mains power is correctly connected.
• The batt
eries may need recharging.
• Has there been a power cut? If so, place the handset back on the base for 10 seconds and try
again. If it still does not work disconnect the batteries and mains power for 10 minutes, then
reconnect and try again.
You have a dial tone, but the phone will not dial out
• You may need
to change the dial mode from tone to pulse, see page 27.
• If you are connected to a switchboard, check whether you need to dial an access code.
Handset does not ring
• The ringer volume may be swi
tched off, see page 23.
• Check that the mains power is correctly connected.
• Make sure the handset is registered to the base, see page 45.
8179 Verve 450 UG [4] 14/5/07 16:06 Page 65
49
To Next Page
Loading...
Need help?
General
