72
BT Verve 450 – Edition 4 – 14.05.07.07 – 8179
General information
IMPORTANT
This equipment is not designed for making emergency
telephone call when the power fails. Alternative
arrangements should be made for access to
emergency services.
Replacing the handset battery
After a time, you may find that the handset battery is
running out of charge more quickly. This is a standard
sign of wear and the batterywill need replacing.
1. Open the battery compartment cover.
2. Take out the old battery and replace with a new
NiMH battery pack.
3. Push the battery compartment cover back on until it
clicks into place.
WARNING
Do not immerse batteries in water or throw them into
a fire, or dispose of them with ordinary domestic
refuse.
VTECH accepts no responsibility for damage caused to
your VT9011 by using any other types of
batteries.
Safety information
• Only use the power supply suitable for the VT9011
range. Using an unauthorised power supply will
invalidate your guarantee and may damage the
telephone.
8179 Verve 450 UG [4] 14/5/07 16:07 Page 72
53
• Use only the approved rechargeable batteries
supplied. Spare rechargeable batteries are available
from the Vtech Customer Service Hotline :
(852)2776-3223
•Do not open the handset (except toreplace the
handset batteries) or the base. This could expose you
to high voltages or other risks.
• If the keylock is switched on, it is NOT possible to
make calls, except to the emergency numbers
(999).
• Radio signal transmitted between the handset and
base may cause interference to hearing aids.
• It is recommended that advice from a qualified expert
be sought before using this product in the vicinity of
emergency/intensive care medical equipment.
• It is recommended that if you have a pacemaker fitted
you check with a medical expert before using this
product.
• Your product may interfere with other electrical
equipment, e.g. TV and radio sets, clock/alarms and
computers if placed too close.
To Next Page
Loading...
Need help?
General
