T01110en.fm 21
Operation
6.6 Parking brake
6.6.1 Integrated parking brake
The machine features an integrated parking brake.
The front wheels are automatically blocked in transport position
(lowest cutting position without a cutting blade) or if the maximum
cutting depth is exceeded.
6.6.2 Manual parking brake (accessories)
Press the pedal (1) down to block the right rear wheel. Push the pedal
upwards for brake release.
Check the tight fit of the parking brake and the setting of the pressure
screw (2) at regular intervals. The brake must securely block the wheel
at least on a 10° slope. Adjust the pressure screw if necessary.
To Next Page
Loading...
Need help?
General
