Wacker Neuson BFS 1345 User Manual

Maintenance
T01071en.fm 29
7. Maintenance
7.1 Maintenance schedule
Component Maintenance work
Maintenance
interval
Machine
Check for signs of damage and wear – change, if neces-
sary the components.
Before operationSafety devices
Main switch
Check for proper functioning – change, if necessary.
Air cleaner
- Check for external damage and a tight fit.
- Check foam and filter element – clean or replace, if nec-
essary.
8 hours (daily)
Fuel
- Check the tank cap for leakage – change, if necessary.
- Check the fuel level – add oil as needed.
Drive motor
Monitoring of:
- Excessive vibrations, operating noise.
- Engine oil and fuel leaks.
Engine oil Check the oil level – add oil as needed.
Miscellaneous
- Check the cutting blade for damage and tightness – re-
place or tighten, if necessary.
- Check the direction of rotation arrow of the cutting
blade.
- Check that the height adjustment moves freely.
- Check the water supply.
Engine oil Initial oil change. 20 hours
Air cleaner Clean – change, if necessary.
50 hours (weekly)
Belt
Check tension and wear – change, if necessary.
Spark plug Clean, set electrode gap 0.7-0.8 mm.
Engine oil Change.
Fuel filter Have this replaced by Wacker Neuson service. 200 hours
Spark plug Change.
300 hours (annually)
Valve clearance
Have this repaired by Wacker Neuson service.

Wacker Neuson BFS 1345 Specifications

General

Brand	Wacker Neuson
Model	BFS 1345
Category	Saw
Language	English