Wacker Neuson BFS 1345 User Manual

T01110en.fm 27
Operation
6.11 Engine operation
After the engine has started, shift the throttle lever to low (L) engine
speed and allow the engine to warm up for a few minutes.
Slowly shift the throttle lever towards the (H) position for high engine
speed in order to set the required engine speed.
Note: If no high engine speed is required, shift the throttle lever back to
operate the engine at idle speed in order to save fuel and extend the service
life of the engine.

Wacker Neuson BFS 1345 Specifications

General

Brand	Wacker Neuson
Model	BFS 1345
Category	Saw
Language	English