EasyManuals Logo
Home>Wacker Neuson>Saw>BFS 1345

Wacker Neuson BFS 1345 User Manual

Wacker Neuson BFS 1345
42 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #26 background imageLoading...
Page #26 background image
Operation
T01110en.fm 26
4. Close the choke.
If the engine is warm or at high ambient temperatures, open the choke
approximately half way or fully.
If the engine is cold or at low ambient temperatures, close the choke.
5. Recoil starter
Slowly pull the recoil starter handle until you can feel resistance
(compression stroke). Return the recoil starter handle to its original
position and pull with force. Do not pull out the entire length of the rope.
As soon as the engine has started, rewind the starter rope by slowly
returning the recoil starter handle to its original position.
6. Choke
After the engine has been started, slowly open the choke and then
leave it in the fully open position.
If the engine is cold or at low ambient temperatures, never fully open
the choke immediately after the engine has been started or the engine
will stall.
Pull quickly
Open

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Wacker Neuson BFS 1345 and is the answer not in the manual?

Wacker Neuson BFS 1345 Specifications

General IconGeneral
BrandWacker Neuson
ModelBFS 1345
CategorySaw
LanguageEnglish

Related product manuals