Wacker Neuson DPU Series User Manual

8 Operation and use
100_0202_op_0011.fm 34
8.4.1 Operate machines with center pole
1. Pull vibration switch
2. Select travel direction and speed with the control handle.
 Speed display by lighting of the slow/fast-rocker switch or flashing for intermediate positions.
Switch slow/fast mode on and off
 Slowly press the slow/fast switch up to increase the speed.
 Slowly press the slow/fast switch down to reduce the speed.
If the warning vibration-control lamp lights up, the maximum speed is set.
If the vibration-control lamp lights up, the speed is lower than maximum.
Item Designation Item Designation
1 Vibratory rammer 3 Forward
2 Central position of control handle 4 Reverse
Item Designation
1 Slow/fast rocker switch
NOTE
To switch from maximum to minimum (or vice versa) speed, the slow/fast operation button
must be pressed for approx. 2–3 seconds.
1
2
3
4
1

Wacker Neuson DPU Series Specifications

General

Brand	Wacker Neuson
Model	DPU Series
Category	Power Tool
Language	English