BA D18 us* 1.1 * D18t600.fm 6-5
Transportation 6
6.2 Loading the machine
Accident hazard due to incorrect loading!
Incorrect loading can cause accidents and serious injury or death.
► Do not allow anyone to stay in the danger zone.
► Read the transport weight off the type label. Add the weight of
subsequently installed equipment to the weight of the machine.
► Get off a transport vehicle only with the help of a person guiding you.
Tie-down points
Preparations
1. – see chapter “2.9 Trailering and Transport” on page 2-12
2. Secure the transport vehicle with chocks to prevent it from rolling.
3. Position the ramps at the smallest possible angle. Ensure that the
grade does not exceed 15° (27 %).
4. Use access ramps and transport surfaces with an antiskid surface
only.
5. Ensure that the loading area is clear and access to it is not obstructed,
for example by superstructures.
Position Position Quantity
A At front of skip 1
B Operator’s compartment on left and right 2
C At rear left and right of machine 2
To Next Page
Loading...
Need help?
General
