9 Use and operation
30
100_0101_op_0001.fm
9.3 Decommissioning
Switching off the machine
1. Slowly remove the machine from the fresh concrete; hold the vibrator head in
the air.
2. Switch off the machine via the ON/OFF switch.
3. Wait until the machine has come to a complete standstill.
4. Put down the machine slowly.
Do not kink the protective hose and power cable.
5. Pull the plug from the plug receptacle.
CAUTION
The vibrator head moves if it is turned on and not immersed in the fresh con-
crete.
Danger of injury or danger of damage to property by uncontrolled vibrator head.
Switch the machine off before you put it down.
CAUTION
The vibrator head heats up if it is turned on and not immersed in the fresh con-
crete.
Hot surface can cause burns.
Damage to the machine with excessive wear.
Do not operate the machine with the internal vibrator not immersed in the
fresh concrete.
Item Designation
1 ON/OFF switch
To Next Page
Loading...
Need help?
General
