Wacker Neuson RD18 User Manual

Maintenance
Drive unit/diesel engine
136
BA RD18 en 01
1
4 43
4 42
Check the radiator
Check the cooling fins of the radiator for fouling.
a
Cooling fins not soiled: The machine is ready for operation.
a
Cooling fins contaminated: Clean the cooling fins thoroughly and
without delay.
Cleaning the radiator
Switch off the diesel engine and remove the ignition key.
Allow the machine to cool down to less than 30 °C (86 °F).
Open the bonnet [2].
Clean the radiator [1] carefully from all sides using a pressure washer.
Close the bonnet [2].
NOTE
If necessary, remove the panel [3] from the bonnet [2] by
undoing four screw connections [4].
4.03.10 Checking the coolant fill level
& Only lubricants with this symbol are permitted ("Technical data",
page 161 onwards).
12
Switch off the diesel engine and remove the ignition key.
Only check the coolant level when the diesel engine is cold.

Wacker Neuson RD18 Specifications

General

Brand	Wacker Neuson
Model	RD18
Category	Construction Equipment
Language	English