Preface
Noise and vibration requirements
BA RD18 en 01
27
1.06 Noise and vibration requirements
The sound emission of the machine was measured according to the CE
Sound Emission Directive in the version 2000/14/EC.
The noise and vibration data at the driver's seat correspond to the
requirements of the EC Machinery Directive, version 2006/42/EC.
Sound power level
Sound indication of the machine
The guaranteed sound power level is specified in the machine's technical
data (see "Technical data" sqq.).
Emissions sound pressure level
Noise data at the driver's seat
The emissions sound pressure level at the driver's seat is specified in the
technical data (see "Technical data" et seq.) (measurement uncertainty in
accordance with DIN EN ISO 11201).
NOTE
When working in the immediate vicinity of the machine, values
may exceed 85 dB(A). In this case, please always wear
personal protective equipment (ear protection).
Vibration data at the driver's seat
Whole-body vibrations
The weighted effective acceleration values, as per DIN EN 1032, for
whole-body vibrations at the driver's seat of a
w
= 0.5 m/s² are not
exceeded.
Hand arm vibrations
The weighted rms values of the acceleration with hand arm vibrations
have been accessed in accordance with DIN EN 1032 and do not exceed
a
hw
= 2.5 m/s².
To Next Page
Loading...
Need help?
General
