Tables
Technical data
BA RD18 en 01
169
5.01 Technical data
NOTE
The version valid at the time the technical data was prepared
for this version of the manual was used (see impressum:
change date). Other values may apply if modifications are
made to the machine in the course of its further development.
5.01.01 RD18-80
Designation Value Unit
Dimensions and weights
Unladen weight without ROPS roll-over bar 1420 kg
Operating weight with ROPS roll-over bar 1590 kg
Front/rear axle load 765/825 kg
Working width/max. working width 862/862 mm
Inside/outside turning radius 2230/3065 mm
Diesel engine
Manufacturer Kubota
Type D1105-E4B
Number of cylinders 3
Power (ISO 14396)/nominal speed 16.1/2600 kW/rpm
Exhaust emissions category EU/USA V/Tier 4
Carbon dioxide emissions (CO
2
)
(1)
1018 g/kWh
Travel drive
Speed, infinitely variable 0–11.0/(0–6.8) km/h / (mph)
Gradeability, with/without vibration 30/40 %
Max. permitted longitudinal incline 20 °
Max. permitted transverse incline 20 °
Vibration
Vibration Front/rear
Frequency/speed, engine speed max. 61/3660 Hz/rpm
Frequency/speed, engine speed 2/3 max. 48/2880 Hz/rpm
Max. amplitude 0.43 mm
Steering
Steering lock to both sides 33 °
Pendulum compensation upwards and downwards 8 °
Filling capacities
Fuel 33.00 l
Engine oil (for oil change) 5.10 l
Diesel engine coolant 6.10 l
Hydraulic oil 26.00 l
Water sprinkling 70.00 l
Sound power level
To Next Page
Need help?
General
