To Next Page

To Previous Page

ARNING ARNING

ARNING

AND SAFETY DECALAND SAFETY DECAL

AND SAFETY DECAL

COMANIA COMANIA

COMANIA

AND PLAAND PLA

AND PLA

TESTES

TES

The plates applied, other than indicating the various manoeuvres for machine control and use,

serve to point out the risks connected with machine operation. An operator who wears glasses must

use them to read the plates.

Keep all the plates clean and legible paying particular attention to the safety warnings indicated.

Replace any damaged or missing plates, which may be obtained from the manufacturer on request.

GENERAL REGULAGENERAL REGULA

GENERAL REGULA

TIONSTIONS

TIONS

Carefully follow the safety warnings contained in the manual and applied on the vehicle; these signal

a potential danger and point out the precautions to take to prevent it. If the warning message is not

fully understood, ask for an explanation from your employer or from your authorised dealer.

- For the entire period of use of the machine, be aware of the possible dangers and take care to

prevent them.

- Inobservance of the regulations for use and maintenance make the machine dangerous to both

the operator and others.

- Do not use the machine until it has been mastered perfectly.

- Do not start any work before having ascertained that your own safety and that of others is safe-

guarded.

- The safety prescriptions are pointed out on the parts and/or controls through special adhesive

labels. Keep them clean or replace them when they become illegible.

- Clothing must be as suitable as possible for the job, and in particular, not loose-hanging; avoid

scarves and ties. Follow the regulations concerning the use of individual protection, in particular:

- Rigid helmet

- Headphones

- Shoess

- Gloves

GENERAL SAFETY REGULATIONS

Wacker Neuson SW10 User Manual

Questions and Answers: