Wacker Neuson SW10 User Manual

27
USE OF THE MACHINEUSE OF THE MACHINE
USE OF THE MACHINEUSE OF THE MACHINE
USE OF THE MACHINE
FILLING AND EMPTYING OF THE SHOVEL
FILLING
To fill the shovel follow the warnings below:
1 - Lower the lifting ams completely.
2 - Turn the shovel until it touches the ground slightly with the point slightly inclined forwards
3 - Advance slowly penetrating the stock pile and at the same time turn the shovel backwards until
it is completely filled.
4 - Raise the lifting arms to just above the stock pile.
5 - Pull back, lower the lifting arms and move, with the shovel low, towards the place of unloading.
EMPTYING
During transfer to the unloading area the shovel
must be positioned as low as possible and in
maximum collection position.
Transfer must be carried out at a moderate
speed.
Move as near as possible to the vehicle to be
loaded keeping in mind that the shovel’s trajec-
tory lengthens during lifting.
1
2
5
4
3
OPERATOR CONTROLS

Wacker Neuson SW10 Specifications

General

Brand	Wacker Neuson
Model	SW10
Category	Compact Loader
Language	English