CUSTOMIZING
Page 78
Contents
Index
• PORTION OF TABLET.
Drag corners of the foreground graphic to
select the tablet area. The background
graphic represents the entire active tablet
area. Values in the ENTER COORDINATES
text boxes change accordingly.
Enter coordinates to select the tablet area.
• Select UNITS of measure for the displayed
values. A count equals one line of tablet
resolution.
• Enter values for the TOP, LEFT, BOTTOM,
and RIGHT boundary of the tablet area.
Values are measured from the top left
corner of the tablet’s active area.
Use your tool on the tablet to select the tablet
area.
• Select the CLICK TO DEFINE TABLET AREA
button.
• Follow the MESSAGE prompts to set the
portion of your tablet that will be used for
mapping.
Note: As you define PORTION OF TABLET, be sure to review the MESSAGE prompts that may appear.
To Next Page
Loading...
Need help?
General
