WAGNER EPG-Sprint X Original Service Manual

56
EPG-SPRINT / EPG-SPRINT X
P_01968
P_01967
SERVICE MANUAL
VERSION 09/2017 ORDER NUMBER DOC2309350
7.5 REPLACING THE DISPLAY PRINT
The control units are delivered with two housing wall thicknesses: 1 mm and 1.5 mm.
To ensure precise spacing of the buttons, two di erent designs of the replacement print
are available.
To select the correct replacement part, the control unit must be opened and the print mount
compared with the following images.
Variant 1 with lock washers and nut (order No. 2310723)
Lock washer and nut
Housing wall thickness 1.0 mm
Variant 2 with clip and locknut (order No. 2333661)
This part can be used in EPG-SPRINT and in EPG-SPRINT X.
Locknut
Housing wall thickness 1.5 mm
Clip
Note:
If a print (Order No. 2333661) is used, an additional 9 spacer sleeves (Order No. 2324703)
must be used.

WAGNER EPG-Sprint X Specifications

General

Brand	WAGNER
Model	EPG-Sprint X
Category	Control Unit
Language	English