Operation / Installation Manual – FCF 5,000, 9,000, 12,000, 16,000
Page 21
Button / Function and Description (Cover Open)
Mode Operations
COOL Mode Operation
● According to the difference between room temperature and set temperature, the microcomputer will
decide if cooling mode is on or off.
● If room temperature is higher than set temperature, unit runs in cooling mode.
● If room temperature is lower than set temperature, the compressor stops and only the fan will run.
● Set temperature should be in range of 61°F to 86°F or 16°C to 30°C
HEAT Mode Operation
● If room temperature is lower than set temperature, the compressor runs in HEAT mode
● If room temperature is higher than set temperature, the compressor will shut off and the fan will run.
● Set temperature should be in range of 61°F to 86°F or 16°C to 30°C.