Operation / Installation Manual – FCF 5,000, 9,000, 12,000, 16,000
Page 4
INTRODUCTION
Thank you for your purchase. No matter which of the following features was the reason for your purchase, we are
sure it will meet your needs and provide many years of efficient and trouble free use. The FCF Series air
conditioners are designed for marine applications incorporating the following features:
Compact design
High efficiency rotary compressors (5-16K)
Cupronickel condenser coil
Raised lance fin designed evaporator coil
Polyester coated 2” (50mm) deep drain pan with two condensate drain locations
Anti-vibration base pan
Pre-charged and pre-wired systems for easy connections
3 speed blower motor. This eliminates all harmonic sounds and rumbles.
Rotatable blower assembly
The controller offers the most technologically advanced design specifically made for the unique requirements of
marine air conditioning. The controller has been designed with the following "user friendly" features:
Non-volatile memory
Low voltage display panel
LED cabin temperature displayed in Fahrenheit or Celsius
Multiple fan speed selections
Compressor pressure fail safe protection
Moisture mode cycle for humidity control
This manual is intended to provide the information necessary to ensure proper installation, operation, and
maintenance of the unit. Improper installation can result in unsatisfactory performance and/or premature failure of
the unit. Before proceeding, please read this manual completely. In the interest of product improvement,
specifications and design are subject to change without prior notice.
To Next Page
Loading...
Need help?
General
