MultiControl | SmartControl | UniBox 4
2 Safety
2.1 Intended use
The control element serves to control the heater.
2.2 Qualification of the installation per-
sonnel
The installation personnel must have the following qualifications:
■
Successful completion of the Webasto training
■
Corresponding qualification for working on technical systems
2.3 Regulations and statutory
provisions
Observe the important information in the "Quick-start guide"
leaflet.
2.4 Safety instructions
Safety instructions for installation
Hazard of electric shock from live components
Before installation, disconnect the vehicle from the power sup-
ply.
Pay attention to proper earthing of the electrical system.
Observe the legal provisions.
Observe the information on the identification plate.
Danger of cuts from sharp edges
Fit chafers to sharp edges.
Safety instructions for operation
Risk of explosion in areas with flammable vapours, flammable
dusts and
hazardous goods (e.g. petrol stations, tank installations, fuel
stores, coal stores, wood stores or grain stores)
Do not switch on or operate the heater.
Risk of poisoning and suffocation caused by exhaust fumes in
enclosed areas without exhaust extraction system
Do not switch on or operate the heater.
Avoid material damage
Risk of short-circuit resulting from damage to cables due to sharp
edges
Fit chafers to sharp edges.
To Next Page
Loading...
Need help?
General
