29
Turn the control knob in order to choose
duration of “a minute”.
Press the control knob in order to confirm
selection.
Heating starts functioning.
Heating symbol and preset remaining operation time
appear in the display.
Quick start button shows green light.
Duration
Heating
4.7.3 Adjusting the remaining operation time during functioning
3
The heater is in the heating mode.
During use the remaining operation time can be only reduced. One cannot
make any changes from the minimum duration which amounts to 10 minutes.
Increasing the operation time is possible only after performing switching off and
restarting the device earlier.
Turn the control knob in order to adjust the
desired remaining operation time.
By means of turning the control knob in
anticlockwise direction one can shorten remaining
operation time.
Press the control knob within 5 seconds in
order to confirm selection.
To Next Page
Loading...
Need help?
General
