Webasto SmartControl User Manual

31

Press the control knob.
Operation time flickers in the display.

Turn the control knob in order to choose the
duration of “an hour”.
By means of turning the control knob in a clock-
wise direction one can select and activate maximum
duration.

Press the control knob in order to confirm
selection.
Duration
Ventilation

Turn the control knob in order to choose
duration of “a minute”.

Press the control knob in order to confirm
selection.
Duration
Ventilation
Ventilation starts functioning.
Ventilation symbol and the remaining operation time
appear in the display.
Quick start button shows blue light.
4.8.3 Adjusting the remaining operation time during functioning
3
The heater is in the ventilating mode.

Turn the control knob in order to adjust the
desired remaining operation time.
By means of turning the control knob in an an-
ticlockwise direction one can shorten the remaining
operation time.
If longer remaining operation time is desired then
longer remaining operation time must be reset.
www.butlertechnik.com
www.butlertechnik.com

Webasto SmartControl Specifications

General

Brand	Webasto
Model	SmartControl
Category	Controller
Language	English