32
Press the control knob within 5 seconds in
order to confirm selection.
4.8.4 Switching off ventilation
3
The heater is in the ventilating mode.
Press quick start button.
The main menu appears in the display.
Backlight of quick start button changes its colour
from blue into white colour.
Heating
4.9 Timer programming
This function is available for control element of MultiControl.
There is a possibility of programming the time settings 7 days in advance.
The heater switches on automatically at the programmed time. There is a possibili-
ty of saving up to 3 time settings per day and altogether up to 21 time settings.
Depending on the used variant of MultiControl device and application case
(e.g. in a car, in a truck, on the boat, etc.), the number of actively available timers
can fluctuate. There are maximum 21 active timers available.
4.9.1 Creating and enabling timers
3
Time and current day of week are set.
3
The heater is switched off.
To Next Page
Loading...
Need help?
General
