Item Safety device Function Check
5
Cover can only be re‐
moved using tool
Prevents live parts from being
touched accidentally
Check that the cover is in
place
6
Cover can only be re‐
moved using tool
Prevents live parts from being
touched accidentally
Check that the cover is in
place
7
Circulation pump cov‐
er
Prevents access to the mov‐
ing pump wheel
Check that the cover is in
place
8
(no picture)
Safety thermostat in
the cooking chamber
Switches off the appliance if
temperature too high
An error code is output in the
event of a fault
(Please contact an authorized
service company to reset the
safety thermostat)
9
(no picture)
Restart after power
failure in case clean‐
ing agent was left in
the appliance
Restarts fully automatic oven
cleaning in a defined state af‐
ter power failure
None
10
(installed by
customer)
Disconnector
■
Installed by the customer
close to the appliance; easi‐
ly visible and accessible,
all-pole action, minimum
contact separation 3
mm.
■
Used to disconnect the ap‐
pliance from the power sup‐
ply during cleaning, repair
and servicing work and in a
hazardous situation
Action:
■
Trip the disconnector
■
Make sure that there is no
live voltage at the mains
supply connecting terminals
3 For your safety
User manual 24
To Next Page
Loading...
Need help?
General