4.
■
Hold the interior glass panel firmly from the top.
■
Press on the spring clip on the top left bracket.
5.
■
Pivot (1) the interior glass panel slightly away from the
top bracket.
■
Lift (2) the interior glass panel out of the door drip tray
and place it down safely.
Fitting the interior glass panel
1.
To fit the interior glass panel, follow the steps for removal
in the reverse order.
2.
Check that the spring clips are securing the interior glass
panel again correctly at the top left and right, and that the
catch on the top right bracket is closed. The appliance
door cannot close until this is the case.
5 Cleaning procedures
User manual 65
To Next Page
Loading...
Need help?
General