EasyManuals Logo

Winterhalter PT-M User Manual

Winterhalter PT-M
57 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #23 background imageLoading...
Page #23 background image
Software | 4 | English
Operating instructions PT Series | 89014547; 2021-03 | 23
4.1.7 Descale
If the warewasher is operated with hard water and without water treatment, then the boiler, the interior of the machine, all
the water lines and other components may develop scale. Grease residues and dirt that remain in the machine can con-
tribute towards hygiene risks, while scaling can lead to failure of heating elements. Regular removal of these coatings is
recommended.
The interior of the warewasher can be descaled using the descaling programme. We recommend running the descaling
programme at the end of every working day, as the machine’s tank is emptied when the programme starts and ends.
For descaling, you need an acid-based descaler suitable for commercial warewashers. Winterhalter recommends de-
scaler A 70 LS.
The water lines and the boiler can be descaled only by an authorised service technician.
Warning
Risk of chemical burn due to contact with descaler
Contact between descaler and the skin or eyes can lead to severe burns or serious eye damage.
Ø Wear protective clothing, protective gloves and protective goggles.
Ø Observe the danger and safety notes on the canister and safety data sheet.
Warning
Danger of chlorine gas developing
Mixing active chlorine cleaner and acid-based descaler produces chlorine gas. Contact with chlorine gas
leads to eye, nose and throat irritations.
Ø Do not mix active chlorine cleaner and acid-based descaler.
Ø Ensure good ventilation when you descale the warewasher.
Note
Danger of corrosion due to descaler solution
Descaler solution has a corrosive effect when in contact with metals and plastics for a long time and there-
fore must not remain in the interior of the machine (e.g. overnight).
Ø Do not terminate the descaling programme and follow the instructions on the display.
Start the descaling programme
When adding the descaler, observe the tank volume and dosing recommendation.
1
2
3
Item Name
1 Terminate descaling programme (possible as long as no descaler has been added)
2 Repeat descaling programme
3 End descaling programme

Table of Contents

Other manuals for Winterhalter PT-M

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Winterhalter PT-M and is the answer not in the manual?

Winterhalter PT-M Specifications

General IconGeneral
Rack size500 x 500 mm
Water consumption per cycle2.4 liters
Total connected load9.5 kW
Protection classIPX5
Power supply400 V / 50 Hz / 3~

Related product manuals